Shandong Shenzong Machinery Co.,Ltd

High quality products, professional services, machinery industry is the core supplier!

Home > News > Content
Attention Problems Of Flatbed Trailer
- Nov 03, 2017 -

Some car trailer hooks are split and need to be assembled when used. After removing the lid on the bumper, assemble the hook that is carried with the vehicle. Install the trailer tool. Whether the selection of soft or hard trailer tools, installation to ensure that the connection of the car when the link is solid and reliable, drag hooks designed to have a safe lock buckle need to lock in place.Flatbed Trailer 

Check the connection before and after the trailer is running. A soft trailer rope with no trailing hook on both ends is to be bundled with a slip knot when used, and the towing rope will be difficult to untie if it is pulled through a huge traction.Flatbed Trailer

Should choose the color of eye-catching trailer tools, such as yellow, blue, fluorescent green, fluorescent red and so on. The colors are not striking enough to hang coloured strips on the trailer tools. Use trailer ropes or trailers with reflective material to increase the warning effect at night.Flatbed Trailer 

Trailer tools in front and rear vehicle trailer hook position to install, such as the fault car for the left hook, then the tractor should also choose the left hook to ensure that the road after the straight drive. And in the installation of trailer hook must be checked afterwards, to ensure that the trailer hook installed fastening, in order to avoid the use of the trailer hook pop-up wounding.Flatbed Trailer

Control the safety car distance. The use of trailer rope trailer to prevent the occurrence of rear-end, need to master the vehicle distance and speed. The length of the general trailer rope is about 5~10m, so the vehicle distance should be controlled within the effective range of the trailer rope and keep the trailer rope in a tight state. The speed of the trailer is controlled under 20km/h.Flatbed Trailer

In order to enable towing tractor can realize towing, require tractor's original motive to have enough power, the drive wheel has enough torque to make the vehicle drive, also require the ground and the wheel to have enough adhesion, otherwise the driving wheel and the ground skid, the vehicle cannot drive. The adhesion is proportional to the driving wheel pressure, increasing the wheel pressure of the driving wheel, the number of driving wheels (such as the Multi-Axis Drive vehicle) can play the traction of the vehicle better.Flatbed Trailer 

Sometimes the use of appropriate patterns of tires and tracks to replace the wheel can also achieve better results. In order to enable the tractor to realize the braking, the brake wheel must have enough braking torque, the ground and the brake wheel should have enough adhesion, otherwise the wheel does not turn, and the vehicle is still on the ground sliding forward and cannot stop.Flatbed Trailer


Previous: No Information

Next: The Springboard Function Of The Car Trailer